Printed Circuit Board Series 4100
Series 4100
Cross Cut Updraft Fish Tail Routers
Diamond cut style updraft router designed for high productivity routing.
Diameter Range
0.1250"
0.50mm - 2.60mm
STANDARD Flute Length (Inch)
| Part Number |
Router Size |
Dimensions (in) | End Style |
|
| Cutting Dia. (ØD) |
Flute Length (L2) |
|||
| 4100.1250.472 | 1/8" | 0.1250 | 0.472 | Fish Tail |
STANDARD Flute Length (Metric)
| Part Number |
Router Size |
Dimensions (mm) | End Style |
|
| Cutting Dia. (ØD) |
Flute Length (L2) |
|||
| 4100.0197.079 | 0.50mm | 0.500 | 2.00 | Fish Tail |
| 4100.0236.118 | 0.60mm | 0.600 | 3.00 | Fish Tail |
| 4100.0236.157 | 0.60mm | 0.600 | 4.00 | Fish Tail |
| 4100.0276.177 | 0.70mm | 0.700 | 4.50 | Fish Tail |
| 4100.0315.197 | 0.80mm | 0.800 | 5.00 | Fish Tail |
| 4100.0354.197 | 0.90mm | 0.900 | 5.00 | Fish Tail |
| 4100.0354.256 | 0.90mm | 0.900 | 6.50 | Fish Tail |
| 4100.0394.197 | 1.00mm | 1.000 | 5.00 | Fish Tail |
| 4100.0394.256 | 1.00mm | 1.000 | 6.50 | Fish Tail |
| 4100.0394.276 | 1.00mm | 1.000 | 7.00 | Fish Tail |
| 4100.0433.256 | 1.10mm | 1.100 | 6.50 | Fish Tail |
| 4100.0472.276 | 1.20mm | 1.200 | 7.00 | Fish Tail |
| 4100.0500.276 | 1.27mm | 1.270 | 7.00 | Fish Tail |
| 4100.0512.276 | 1.30mm | 1.300 | 7.00 | Fish Tail |
| 4100.0551.256 | 1.40mm | 1.400 | 6.50 | Fish Tail |
| 4100.0591.315 | 1.50mm | 1.500 | 8.00 | Fish Tail |
| 4100.0630.256 | 1.60mm | 1.600 | 6.50 | Fish Tail |
| 4100.0630.315 | 1.60mm | 1.600 | 8.00 | Fish Tail |
| 4100.0669.315 | 1.70mm | 1.700 | 8.00 | Fish Tail |
| 4100.0709.315 | 1.80mm | 1.800 | 8.00 | Fish Tail |
| 4100.0748.315 | 1.90mm | 1.900 | 8.00 | Fish Tail |
| 4100.0787.394 | 2.00mm | 2.000 | 10.00 | Fish Tail |
| 4100.0945.394 | 2.40mm | 2.400 | 10.00 | Fish Tail |
| 4100.0984.394 | 2.50mm | 2.500 | 10.00 | Fish Tail |
| 4100.1004.394 | 2.55mm | 2.550 | 10.00 | Fish Tail |
| 4100.1024.394 | 2.60mm | 2.600 | 10.00 | Fish Tail |
Part Numbers above include rings set at 0.800"
For Ringless Part Number, replace series "." with "-" (XXX-XXXX.XXXX)
Additional diameters and special ring colors available upon request
© KYOCERA Precision Tools | All rights reserved.