Printed Circuit Board Series 4100
Series 4100
Cross Cut Routers
Updraft design for superior tool life and exceptional edge finish.
0.0197" - 0.1250" DIAMETER
0.50mm - 3.175mm DIAMETER
Standard part numbers include rings. For ringless, replace the Series "." with "-"
(e.g. ringless Series 4100, 1.60 mm: 4100-0630.315)
Fish Tail Dimensions
| Diameter | Flute Length | Part Number | ||
| Metric | Inch | Metric | Inch | |
| 0.50mm | 0.0197" | 2.00mm | 0.079" | 4100.0197.079 |
| 0.60mm | 0.0236" | 3.00mm | 0.118" | 4100.0236.118 |
| 0.80mm | 0.0315" | 5.00mm | 0.197" | 4100.0315.197 |
| 0.80mm | 0.0315" | 6.50mm | 0.256" | 4100.0315.256 |
| 0.90mm | 0.0354" | 5.00mm | 0.197" | 4100.0354.197 |
| 0.90mm | 0.0354" | 6.50mm | 0.256" | 4100.0354.256 |
| 1.00mm | 0.0394" | 5.00mm | 0.197" | 4100.0394.197 |
| 1.00mm | 0.0394" | 6.50mm | 0.256" | 4100.0394.256 |
| 1.10mm | 0.0433" | 5.00mm | 0.197" | 4100.0433.197 |
| 1.10mm | 0.0433" | 7.00mm | 0.276" | 4100.0433.276 |
| 1.20mm | 0.0472" | 5.00mm | 0.197" | 4100.0472.197 |
| 1.20mm | 0.0472" | 7.00mm | 0.276" | 4100.0472.276 |
| 1.30mm | 0.0512" | 5.00mm | 0.197" | 4100.0512.197 |
| 1.30mm | 0.0512" | 7.00mm | 0.276" | 4100.0512.276 |
| 1.40mm | 0.0551" | 6.50mm | 0.256" | 4100.0551.256 |
| 1.40mm | 0.0551" | 8.00mm | 0.315" | 4100.0551.315 |
| 1.50mm | 0.0591" | 6.50mm | 0.256" | 4100.0591.256 |
| 1.50mm | 0.0591" | 8.00mm | 0.315" | 4100.0591.315 |
| 1.60mm | 0.0630" | 6.50mm | 0.256" | 4100.0630.256 |
| 1.60mm | 0.0630" | 8.00mm | 0.315" | 4100.0630.315 |
| 1.70mm | 0.0669" | 8.00mm | 0.315" | 4100.0669.315 |
| 1.80mm | 0.0709" | 8.00mm | 0.315" | 4100.0709.315 |
| 1.90mm | 0.0748" | 8.00mm | 0.315" | 4100.0748.315 |
| 2.00mm | 0.0787" | 8.00mm | 0.315" | 4100.0787.315 |
| 2.00mm | 0.0787" | 10.00mm | 0.394" | 4100.0787.394 |
| 2.20mm | 0.0866" | 10.00mm | 0.394" | 4100.0866.394 |
| 2.30mm | 0.0906" | 10.00mm | 0.394" | 4100.0906.394 |
| 2.40mm | 0.0945" | 10.00mm | 0.394" | 4100.0945.394 |
| 2.50mm | 0.0984" | 10.00mm | 0.394" | 4100.0984.394 |
| 2.55mm | 0.1004" | 10.00mm | 0.394" | 4100.1004.394 |
| 3.00mm | 0.1181" | 10.00mm | 0.394" | 4100.1181.394 |
| 3.10mm | 0.1220" | 10.00mm | 0.394" | 4100.1220.394 |
| 3.175mm | 1/8" | 12.00mm | 0.472" | 4100.1250.472 |
- Part numbers in BOLD are the most readily available
Drill Point Dimensions
| Diameter | Flute Length | Part Number | ||
| Metric | Inch | Metric | Inch | |
| 0.80mm | 0.0315" | 5.00mm | 0.197" | 4100.0315.197D |
| 0.90mm | 0.0354" | 5.00mm | 0.197" | 4100.0354.197D |
| 1.00mm | 0.0394" | 6.50mm | 0.256" | 4100.0394.256D |
| 1.10mm | 0.0433" | 7.00mm | 0.276" | 4100.0433.276D |
| 1.27mm | 0.0500" | 7.00mm | 0.276" | 4100.0500.276D |
| 1.40mm | 0.0551" | 6.50mm | 0.256" | 4100.0551.256D |
| 1.50mm | 0.0591" | 6.50mm | 0.256" | 4100.0591.256D |
| 1.587mm | 1/16" | 8.00mm | 0.315" | 4100.0625.315D |
| 1.80mm | 0.0709" | 8.00mm | 0.315" | 4100.0709.315D |
| 1.90mm | 0.0748" | 8.00mm | 0.315" | 4100.0748.315D |
| 2.00mm | 0.0787" | 8.00mm | 0.315" | 4100.0787.315D |
| 2.10mm | 0.0827" | 10.00mm | 0.394" | 4100.0827.394D |
| 2.30mm | 0.0906" | 10.00mm | 0.394" | 4100.0906.394D |
| 2.38mm | 3/32" | 10.00mm | 0.394" | 4100.0938.394D |
| 2.50mm | 0.0984" | 10.00mm | 0.394" | 4100.0984.394D |
| 2.55mm | 0.1004" | 10.00mm | 0.394" | 4100.1004.394D |
| 3.175mm | 1/8" | 12.00mm | 0.472" | 4100.1250.472D |
- Additional Drill Point diameters are available upon request
© KYOCERA Precision Tools, Inc. | All rights reserved.